View cart “Optical Fiber Cleaver” has been added to your cart.
Optical Power Meter T-OP300T
August 21, 2018
Show all

OTDR T-OT650 DB 32/30


Key Features

  • Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved and automatically analyzed.
  • Multi-wavelength Measurement Mode: In the parameter setting, the wavelength can be automatically switched into the multi-wavelength measurement mode. Under this mode, the analysis can be achieved on the attenuation state of the same fiber section under different wavelengths.
  • Trace Fixing Function: It can achieve the same-screen comparison and display of one trace with another real-timetrace or the trace under the average measurement, which is very useful for the installation of multi-core fiber orthe checking of the aged fiber in the optical fiber network already been installed.
  • Multi-wavelength Analysis Function: It can achieve the comparison, display and analysis functions of any trace file.
  • FTTx online testing, able to identify the splitter and the fiber’s end.
  • Large-capacity lithium-ion rechargeable battery, with the long standby time over 12 hours.
  • Bellcore file format (.sor), with the storage of greater than 2000 traces.
  • Communication Light Detection: It can effectively protect the test instrumentation and communicationequipment’s.
  • Connection State Detection: To promptly know the connection status of the instrumentation and the fiber for test.
  • The Switching of Measurement Mode: Through the shortcut key operation, it can achieve the flexible switching ofreal-time measurement mode and average measurement mode.

OTDR Traces Manager PC software:

  • To achieve easily the function of bulk amendment and batch printing.
  • Able to generate different forms of test reports according to user needs.
  • To provide various flexible printing modes: The single-page single-trace printing mode, the batch printing mode, the single-page multi-trace printing mode, the printing mode of multi-waveform display. To provide the personalized selection of printing options and page setup.
  • The Function of Waveform Difference Comparison: It can open several wave forms in the same window, making more easily the comparison of parameter change caused by fiber aging or other reasons.




Technical Specification: 

Wavelength (nm) 1310/1550
Dynamic range (dB)2 32/30
Event blind zone (m) 1m
Attenuation blind zone (m) 6m
Pulse width (ns) 5、10、50、160、320、500、1000、5000、10000、20000ns
Test distance 500m, 1km, 2km, 4km, 8km, 16km, 32km, 64km, 128km, 256km
Type Single model
Linearity (dB/dB) ±0.05 dB/ dB
Accuracy of reflection ±3dB
Sampling point 128K
Distance uncertainty (m) ±(0.75m + 5×10-5× distance + sampling interval)
Memory capacity of trace SD Card , > 2000 pieces
Supply AC/DC charger: 100V-240V, 50/60/HZ, 0.6A Battery: 7.4V 6700mAh
Optical power meter +26dBm~-50dBm (+6dBm~-70dBm)
General specification Interface category
Dimension (H×W×D) 215×150×70mm Optical interface FC/PC(SC,ST for option)
Weight <1.1kg Data interface USB interface, mini-USB, 10M/100M ethernet port
Temperature Running temperature -5℃ to 50℃
Memory temperature -20℃ to 70℃ Visible failure orientation VFL
Relative humidity 0% to 95% (non condensation) Wavelength 650nm±10nm,≥5mW
Power supply Lithium battery; continuing working duration max 12 hours Output power (dBm) ≥-5
Warranty period 12 months Maximum testing distance 5 km



Reviews (0)


There are no reviews yet.

Be the first to review “OTDR T-OT650 DB 32/30”

Your email address will not be published. Required fields are marked *

WhatsApp chat